Your Opinion Matters!
Take our viewer survey and help us produce the television you want to see!
Kevin offers to help a veteran buddy get his bike ready for Biketoberfest. They’ll wet blast some of the bike and properly lay paint on it. Kevin fixes his buddy’s truck speedometer that reads incorrectly due to oversized tires, and then they’ll head out to Detroit one more time to Dyno Kevin’s completed ARP Coyote engine build!
Kevin and Willie tackle a DOD / AFM delete on a 5.3 V8 in a 2008 Saab 9-7X. They’ll tackle this GM platform’s problematic fuel management system by swapping out the camshaft, lifters, valley plate and a few other parts to give this engine its power back. They guys then take off to Detroit to Dyno Willie’s now completed ARP Hemi engine build!
You’ve seen the videos, you’ve read the articles, and Kevin and Willie are stoked, as one of the quickest SUV’s in the world rolls in to the shop – the Trackhawk! They’ll take this supercharged Hellcat V8 making 707 Hp from the factory and wick it up to 1025 Hp with the brand new Livernois Performance Package!
The guys have an old ’99 Ford Ranger in the shop. It’s the owner’s daily driver and the years have not been good to it. They’ll replace the old front and rear suspension, replace the faulty power steering pump and tackle some other maintenance issues to get this truck driving safely again.
In the shop today is a 2004 BMW M3 with a faulty SMG (Sequential Manual Gearbox)Transmission. The owner wants to put the fun back in driving by making the vehicle a manual, and since the conversion is cheaper than replacing it with a new one, the guys get to work to make this swap happen.
The guys get their hands on a 2019 Jeep JL. They’ll be lifting it, adding new wheels and tires, and installing a new exhaust to give this stock Jeep the look and sound that it deserves.
The guys have a ’74 Nova in the shop that desperately needs some help. The project has stalled, and the guys jump in to help the owner get it moving again. So, Kevin and Willie get the interior finished up and toss in a few needed extras to get this Nova project back on track!
Kevin and Willie have a 2016 GMC Sierra 1500 in the shop today. The owner bought a new boat and needs a few accessories added to complete the package. So, the guys add automatic power side steps, tow mirrors, and a new performance programmer to get this tow rig ready for the weekend!
The guys have a 2016 Mustang with an Ecoboost engine in the shop that is in need of more power. So, Kevin and Willie add a new turbo and intercooler to boost this 4-cylinder engine from mild to wild!
Today Willie and Kevin get a classic American Exotic car in the shop, a Dodge Viper! Even with its low miles, the clutch is slipping and needs to be replaced. So, the guys get to work and deep dive in to replacing the clutch and flywheel to get this one of a kind American V10, ripping back down the road.
The guys have a 1967 Mustang resto’ project in the shop that has come to a standstill. The owner needs their help moving it along, so they wet blast it, show how to properly replace a metal rear quarter panel, then they seal it with some epoxy primer to get it ready to continue its restoration journey.
Willie and Kevin take a stock F-150 from boring to bold by lifting it up and dressing it up. After doing a 6-inch lift kit, they replace a problematic AC compressor, add new brakes & rotors, and finish it off with new wheels, tires, and a tonneau cover before taking it out for a spin.